Charnwood VIPERIC Thread Adaptor Exert M33 x 3.5 to 1'' x 8tpi ONEID_OVER_18 reduce tear-out and create a

reduce tear-out and create a clean pocket hole on the first try

Small cutlery knives

Drill up to six matching holes per set-up

Milescraft's Edge&MortiseGuide is perfect for mortises

The table is finely ground cast iron and moves smoothly and effortlessly front to back and side to side on machined dovetail slides

Charnwood VIPERIC Thread Adaptor Exert M33 x 3.5 to 1'' x 8tpi ONEID_OVER_18 reduce tear-out and create aHeadstock thread adaptor. To fit onto a lathe with M33 x 3. 5mm headstock thread. Suitable to mount a Scroll Chuck or Faceplate with a 1" x 8tpi thread. The thread adaptor has spanner flats to aid tightening or removal. This thread adapter has 2 locking screws for securing the adaptor onto the lathe. Centre located 7mm from the end. Includes 10mm diameter blind hole for tightening or removing using a suitable knock out bar. Specification Adaptor Type